Show simple item record

dc.contributor.authorAggarwal, S.K.
dc.contributor.authorAwomolo, O.
dc.contributor.authorAkber, K.
dc.date.accessioned2012-08-20T03:33:56Z
dc.date.available2012-08-20T03:33:56Z
dc.date.issued2011-11
dc.identifier.bibliographicCitationAggarwal, S. K., Awomolo, O., & Akber, K. 2011. Ignition characteristics of heptane-hydrogen and heptane-methane fuel blends at elevated pressures. International Journal of Hydrogen Energy, 36(23): 15392-15402. DOI: 10.1016/j.ijhydene.2011.08.065en
dc.identifier.issn0360-3199
dc.identifier.otherDOI: 10.1016/j.ijhydene.2011.08.065
dc.identifier.urihttp://hdl.handle.net/10027/8559
dc.descriptionNOTICE: this is the author’s version of a work that was accepted for publication in International Journal of Hydrogen Energy . Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in International Journal of Hydrogen Energy , Vol 36, Issue 23, (NOV 2011) DOI: 10.1016/j.ijhydene.2011.08.065en
dc.description.abstractThere is significant interest in using hydrogen and natural gas for enhancing the performance of diesel engines. We report herein a numerical investigation on the ignition of n- C7H16/H2 and n-C7H16/CH4 fuel blends. The CHEMKIN 4.1 software is used to model ignition in a closed homogenous reactor under conditions relevant to diesel/HCCI engines. Three reaction mechanisms used are (i) NIST mechanism involving 203 species and 1463 reactions, (ii) Dryer mechanism with 116 species and 754 reactions, and (iii) a reduced mechanism (Chalmers) with 42 species and 168 reactions. The parameters include pressures of 30atm and 55atm, equivalence ratios of =0.5, 1.0 and 2.0, temperature range of 800-1400K, and mole fractions of H2 or CH4 in the blend between 0-100%. For n-C7H16/air mixtures, the Chalmers mechanism not only provides closer agreement with measurements compared to the other two mechanisms, but also reproduces the negative temperature coefficient regime. Consequently, this mechanism is used to characterize the effects of H2 or CH4 on the ignition of n-C7H16. Results indicate that H2 or CH4 addition has a relatively small effect on the ignition of n- C7H16/air mixtures, while the n-C7H16 addition even in small amount modifies the ignition of H2/air and CH4/air mixtures significantly. The n-C7H16 addition decreases and increases the ignition delays of H2/air mixtures at low and high temperatures, respectively, while its addition to CH4/air mixtures decreases ignition delays at all temperatures. The sensitivity analysis indicates that ignition characteristics of these fuel blends are dominated by the pyrolysis/oxidation chemistry of n-heptane, with heptyl (C7H16-2) and hydoxyl (OH) radicals being the two most important species.en
dc.description.sponsorshipThis work was partially supported by the U.S. Department of Energy Office of Vehicle Technology under the management of Mr. Gurpreet Singh.en
dc.language.isoen_USen
dc.publisherElsevieren
dc.titleIgnition characteristics of heptane–hydrogen and heptane–methane fuel blends at elevated pressuresen
dc.typeArticleen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record